FAQ’s

How do you install Genesis?

They will quickly and easily fit into almost any ceiling grid system. Genesis Panels are lay-in ceiling panels and are available in the same sizes as fiber-based ceiling tiles, 2′ x 2′ and 2′ x 4′.

Will Genesis install in my existing grid system?

If you are using the standard grid size for 2’ x 2’ or 2’ x 4’ tiles, yes, Genesis will easily install. There are some grids that use a “stab and connect” system that may cause the corners of the tile to sit higher than the rest of the tile.

Why is the thickness of Genesis different for different panels?

To be sure the panels won’t sag. The 2′ x 2′ will be either 4mm or 5mm depending on the pattern selected. The 2′ x 4′ panels are 5mm.

What happens if water condensation on pipes lands on the ceiling panels?

The water evaporates and leaves no discoloration.  Perhaps more important, Genesis does not permit the growth of mold and mildew.

How will I know if I have a major water leak?

The water will drip between the grid and ceiling tile. This will quickly alert you to the problem, as water will drip on the floor. Obviously, the leak still needs to be fixed, but the value of Genesis is that you can dry off the tile and reinstall it, undamaged.

How do I cut Genesis?

Use a skill saw or RotoZip to cut to odd sizes and a hole-saw or RotoZip for sprinkler heads or can lights. The tile can be trimmed with a utility knife. You may also use a metal angle ruler, score it and snap the tile.

Can I paint Genesis ceiling panels?

Although we do not guaranty the results and have not tested painting the panels, some primers and paints are specifically formulated for plastics, including PVC.

For example: Krylon® Fusion, Valspar® and Rustoleum® manufacture a plastic primer that can be applied and then a standard latex or acrylic paint can be used as a topcoat. There are other primers and paint that are designed to cover vinyl siding that may work.

Generally, paints that are mostly acrylic-based are the best as they stick to the vinyl better without cracking or chipping off. Urethane-modified acrylic paint also works well. Do not use poor quality latex or oil-based paints as they will not expand and contract with the surfaces and will crack and chip.

What is the best way to clean Genesis?

You can use any household cleaner. Just spray the cleaner onto a clean rag and wipe. You can also power-wash Genesis panels and even place them in an industrial dishwasher up to 145 degrees F. The tiles are unaffected by most corrosive chemicals, but you should avoid using acidic cleaners. Do not use abrasive cleansers to scrub.

How do you keep the tiles in place where there are significant updrafts?

We offer optional clips that may be used for drafty areas or uneven grid systems.